Jewelry MakingTOOLS

Manual tools. Working details. Informed choices.

Browse departments

ARTYMASTER / Bench Holding & Measuring

ARTYMASTER WT104B Mini Vise with C-Clamp

A small aluminum-alloy vise with 0–2.48-inch opening, a C-clamp, rubber soft jaws and eight POM holding pillars.

Model
WT104B
Clamping range
0–2.48 in
Body
Anodized aluminum alloy
ARTYMASTER mini vise with C-clamp as pictured in the product listing
One mini vise shown with C-clamp and accessory parts. The smaller view repeats the same tool; the wooden board illustrates mounting.

CHOOSING THIS MODEL

Choose the contact supports and mounting method

This mini vise offers several ways to support a small piece. The 0–2.48-inch opening sets the stated clamping range, while V-shaped grooves provide a different seat for cylindrical work. Rubber soft jaws and eight POM pillars are supplied as additional contact options rather than separate vises.

The selected WT104B includes a C-clamp for a table edge. The aluminum-alloy body has an anodized surface and a nickel-plated steel screw. The description also discusses screw-secured 90- or 180-degree mounting arrangements and a bottom mounting slot, so choose the attachment approach that actually matches your bench or fixture.

Compare the QWORK swivel-and-tilt vise if changing the working angle is more useful than this mix of soft jaws and pillars. A clamping opening is not the maximum tabletop thickness, and the source gives no universal drill-press mounting pattern or clamping-force rating. Confirm those interfaces before planning a fixed installation.

MODEL DETAILS

Specifications & included parts

Details for ARTYMASTER WT104B Mini Vise with C-Clamp
DetailProduct details
ModelWT104B
Clamping range0–2.48 in
BodyAnodized aluminum alloy
ScrewNickel-plated steel
Selected kitMini vise with C-clamp
Soft jaws1 pair of rubber jaws
Holding pillars8 POM pillars
Other featuresV-shaped grooves and bottom mounting slot
Other listed accessoriesWrench and screws; counts not itemized

Check the selected size, working profile and supplied parts on Amazon before ordering.

Where this model is useful

  • Soft jaws, pillars and V-grooves offer different workpiece-contact arrangements.
  • The selected kit includes the table-edge C-clamp.

Trade-offs to check

  • Clamping opening does not establish allowable bench thickness.
  • No universal drill-press fit or numeric holding force is supplied.

What to check before choosing

Check the bench interface

Confirm table-edge thickness or screw-slot pattern for the intended mounting method.

Your questions about this product

Is the C-clamp part of this selection?

Yes, the selected style is Mini Vise+C-clamp and the components list it.

What are the eight pillars made from?

POM is explicitly named for the eight holding pillars.

Does 2.48 inches describe table thickness?

It is the workpiece clamping range, not a stated bench-edge thickness capacity.

Other options to consider

About this product information

Exact selected-ASIN title, full available description, feature bullets, component-scoped specifications and all textual A+ sections reviewed; model-specific manufacturer sources used only where separately listed.

Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06

Confirm the current variation and supplied parts on Amazon before ordering.

More in this department.

Explore the department ↗

QWORK

QWORK WD5534 Two-End Wooden Ring Clamp

Working ends
One rounded jaw end and one square jaw end
Body / hinge
Hardwood body with steel hinge

Rounded and square jaw ends give one hardwood clamp two contact profiles for small work.

$9.25Nov 6, 26, 02:56 PM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Order and pay on Amazon.

EUROTOOL

EUROTOOL RCL-653.02 Ring Clamp with Custom Bench Pin

Supplied pairing
RCL-653.02 ring clamp and BPN-106.50 custom bench pin
Locating feature
Collar stations in the pin’s V-cut

A collar locates the mahogany ring clamp in the supplied custom pin’s V-cut for a supported holding arrangement.

$20.14Nov 6, 26, 02:56 PM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Order and pay on Amazon.

ASSORTS

ASSORTS AVUH-50BT Eight-Pin Bench Work Holder

Selected style
Bench Top Clamp
Working system
Removable, revolving head with eight repositionable pins

Eight repositionable pins and a removable revolving head provide a different hold from fixed ring jaws.

$25.50Nov 6, 26, 02:56 PM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Order and pay on Amazon.

SFC TOOLS

SFC TOOLS 13-362 Multi-Slot Bench Pin with Clamp

Working forms
Multiple slots, V-slot and end filing grooves
Described support dimensions
6 × 4 × ½ in

Multiple slots, a general V-slot and end grooves offer more support positions than a single V-cut rest.

$19.95Nov 6, 26, 02:56 PM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Order and pay on Amazon.