QWORK / Bench Holding & Measuring
QWORK Swivel-and-Tilt Tabletop Vise
A swiveling and tilting tabletop vise for changing the approach to light jewelry and craft work.

CHOOSING THIS MODEL
Bring the held piece to a different angle
Changing the approach angle is the reason to compare this QWORK vise with a fixed mini vise. Its head is described as rotating 360 degrees and tilting 45 degrees, so the work can be repositioned without moving the entire vise. The aluminum-alloy body and oval tabletop base are described for general light work, including jewelry and small crafts.
Confirm the jaw opening for the piece you need to hold. The feature text gives a 0–2-inch clamping range, while the listing’s A+ size drawing labels the jaw opening as up to 3 inches. The 3-inch width statement is not clearly assigned to a particular part. These do not establish one consistent working opening or a confirmed jaw width.
The same drawing labels a 2–3/16-inch clearance at the lower mounting clamp and a 10–1/4-inch overall height. Use these as illustrated dimensions to discuss your bench-edge fit with the seller, rather than treating the workpiece opening as the bench capacity. The ARTYMASTER alternative provides rubber soft jaws, POM pillars and a C-clamp; choose between contact supports and QWORK’s angle adjustment. No numerical holding-force or working-load rating is supplied.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Model | WD3779 |
| Head rotation | 360° |
| Head tilt | 45° |
| Body | Aluminum alloy |
| Base | Oval tabletop mounting base |
| Described use | Light general-purpose work |
| Illustrated lower mounting-clamp clearance | 2–3/16 in, exact-listing A+ size diagram |
| Illustrated overall height | 10–1/4 in, exact-listing A+ size diagram |
Check the selected size, working profile and supplied parts on Amazon before ordering.
Where this model is useful
- A rotating and tilting head changes the workpiece approach without repositioning the whole vise.
- The listing describes the aluminum-alloy tool for light jewelry and craft tasks.
Trade-offs to check
- The feature text gives a 0–2-inch workpiece opening, but the A+ drawing labels up to 3 inches; confirm the actual opening.
- The 3-inch width statement is not clearly scoped to jaw width.
- The mounting clearance and overall height are seller-diagram dimensions, without an independent fit tolerance.
- No numerical holding-force or working-load rating is supplied.
What to check before choosing
Match the workpiece and bench separately
Ask for the current jaw opening and compare the lower clamp with your bench edge; the listing gives conflicting jaw-opening values.
Your questions about this product
Will it hold a workpiece that is wider than 2 inches?
Confirm this before purchase. The feature text says a 0–2-inch opening, but the A+ drawing says up to 3 inches; the two statements do not establish one reliable limit.
What should I check at the bench edge?
The A+ drawing labels 2–3/16 inches at the lower mounting clamp. Compare that illustrated clearance with the actual edge and attachment space; it is a separate measurement from the upper workpiece opening.
Why choose this instead of the soft-jaw ARTYMASTER kit?
Compare QWORK for its 360-degree rotation and 45-degree tilt. ARTYMASTER emphasizes rubber soft jaws, removable POM pillars and its C-clamp; choose the contact and approach arrangement your piece needs.
Other options to consider
About this product information
Exact selected-ASIN title, full available description, feature bullets, component-scoped specifications and all textual A+ sections reviewed; model-specific manufacturer sources used only where separately listed.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
- QWORK WD3779 — exact-listing A+ size drawing ↗ · checked 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.



