Jewelry MakingTOOLS

Manual tools. Working details. Informed choices.

Browse departments

The Beadsmith / Crimping & Stringing

The Beadsmith 10-Inch Hook Eye Stringing Needle

A long hook-eye needle for arranging beads before transferring them to cord; the stated bead-hole requirement is 2 mm or larger.

Needle length
10 in /25.4 cm
Bead-hole requirement
2 mm or larger
Transfer end
Hook eye
Beadsmith hook-eye stringing needle as pictured in the product listing
One hook-eye needle pictured. The close-up repeats its working end rather than showing another needle.

CHOOSING THIS MODEL

Load the sequence before transferring it

This hook-eye needle separates bead loading from the final cord transfer. Arrange the beads on the long needle, attach your cord at the hook, then move the beads onto the cord. The loop at the opposite end keeps the loaded sequence from simply sliding off while you work, a useful arrangement when a bracelet has a repeated color or letter pattern.

The 10-inch metal body gives you a defined loading length, but the more important fit measurement is the hole through each bead: the description calls for 2 mm openings or larger. A bead can be physically large and still have a small hole. Check that opening and the cord connection before choosing this model for a project.

The Beadalon Elastic Cord Needle is the closer comparison for a stated 1 mm minimum bead hole and a specified 0.30–1 mm cord range. This Beadsmith model instead provides the 2 mm-hole guidance and a hook intended for bead cord, elastic, silk or wire, without a separately stated cord-diameter range. Choose the fit that is actually documented for your materials.

MODEL DETAILS

Specifications & included parts

Details for The Beadsmith 10-Inch Hook Eye Stringing Needle
DetailProduct details
Needle length10 in /25.4 cm
Bead-hole requirement2 mm or larger
Transfer endHook eye
Opposite endRetaining loop
Needle materialMetal
ModelHKN25

Check the selected size, working profile and supplied parts on Amazon before ordering.

Where this model is useful

  • A retaining loop supports loading the design before the cord transfer.
  • The stated 2 mm minimum hole gives a concrete fit check.

Trade-offs to check

  • The 2 mm requirement is a bead-hole dimension, not a bead size.
  • A numeric cord-diameter range is not established for this model.

What to check before choosing

Measure the bead opening

Check the narrowest passage and the hook/cord connection, not just the bead’s external size.

Choose the needle format

Compare the Beadalon model if you need its explicitly stated smaller-hole/cord pairing.

Your questions about this product

How do beads get onto the cord?

They are first loaded onto the needle, then moved onto the cord attached at the hook end.

Can I use beads with 1 mm holes?

This model is described for holes 2 mm or larger; use a needle with documented fit for your smaller holes.

What stops the beads sliding off while loading?

The opposite end is looped to retain the loaded beads.

Other options to consider

About this product information

Exact selected-ASIN title, full available description, feature bullets, component-scoped specifications and all textual A+ sections reviewed; model-specific manufacturer sources used only where separately listed.

Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06

Confirm the current variation and supplied parts on Amazon before ordering.

More in this department.

Explore the department ↗

The Beadsmith

The Beadsmith EZ Knotting Tool with Protective Cover

Working point
Attached sharp needle
Protective parts
Heavy rubber cover with metal needle cap

A pointed knotting tool, protective cover and illustrated instructions focus the purchase on knot placement.

$16.99Nov 6, 26, 02:50 PM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Order and pay on Amazon.

Beadalon

Beadalon Knot-A-Bead Tabletop Knotter

Working arrangement
Tabletop; cord handled with two hands
Seller bead-size scope
Up to 16 mm bead diameter

A tabletop yoke and auto-reset awl support knot placement while both hands work with the cord.

$27.06Nov 6, 26, 02:51 PM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Order and pay on Amazon.

Beadalon

Beadalon 201E-001 Knotting Pliers

Working tips
Thin and smooth
Construction
Stainless steel, box joint

Thin smooth tips offer a gripping approach to knot placement on silk and other fibrous stringing materials.

$12.99Nov 6, 26, 02:51 PM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Order and pay on Amazon.

The Beadsmith

The Beadsmith Rubber-Grip Beading Awl

Working surface
Smooth metal shaft with pointed tip
Grip
Rubber

A smooth pointed shaft is aimed at knot guiding and loosening rather than an abrasive reaming surface.

$8.99Nov 6, 26, 02:51 PM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Order and pay on Amazon.