MegaCast / Hammers & Metal Forming
MegaCast Nine-Face Texturing Hammer
Nine face choices, including a plain dome, add pattern selection to one hammer body.

CHOOSING THIS MODEL
Nine face choices, including a plain dome, add pattern selection to one hammer body
Choose MegaCast when face pattern is the working choice you want to change. The named set contains a hammer and nine interchangeable heads: cross-hatch, wide stripes, sharp dimple, narrow stripes, inverted dimple, square dimple, round dimple, diamond and domed plain. That is one hammer with a face assortment, not nine complete hammers.
The steel faces are held by threaded collars on a polished wooden-handled tool. Overall length is listed at 9½ inches and each tip diameter at approximately ¾ inch. The seller describes an 8 oz head; the complete hammer’s mass is not clearly distinguished. The listed patterns are the useful comparison with a plain chasing hammer or OWDEN’s material-changing faces. Choose the receiving material and support from their instructions rather than treating an attractive texture example as a guaranteed result.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Supplied allocation | One hammer and nine interchangeable faces |
| Face choices | Cross-hatch; wide stripes; sharp dimple; narrow stripes; inverted dimple; square dimple; round dimple; diamond; domed plain |
| Approximate tip diameter | ¾ in each |
| Face retention | Threaded collars |
| Overall length, as described | 9½ in |
| Materials | Steel head/faces; polished wood handle |
| Head mass, as described | 8 oz |
Check the selected size, working profile and supplied parts on Amazon before ordering.
Where this model is useful
- Face patterns can be changed on one body.
- The plain dome is identified within the pattern assortment.
Trade-offs to check
- Whole-tool mass, external refill-thread fit and metal thickness/temper capacity are not established.
What to check before choosing
Buying spare faces?
Confirm the actual collar/thread system; interchangeability within this kit does not establish another brand’s fit.
Your questions about this product
Which texture faces are supplied?
Cross-hatch, wide stripes, sharp dimple, narrow stripes, inverted dimple, square dimple, round dimple, diamond and domed plain: nine interchangeable heads for one hammer.
How are the heads held?
The description names threaded collars on the wooden-handled hammer. Cross-brand replacement-face fit is not specified.
What are the working-tip size and tool length?
Each tip is approximately ¾ inch in diameter and the overall hammer is listed at 9½ inches. These are tool dimensions, not an allowable sheet thickness.
Other options to consider
The Beadsmith Chasing Hammer, 14 and 28 mm Faces
Choose the Beadsmith 14/28 mm tool for plain ball/domed steel contacts rather than a pattern-face system.
Explore this option ↗OWDEN AJ0009 Three-Face-Material Hammer and Bench Block
Compare OWDEN for changing contact material between steel/brass/nylon instead of texture patterns.
Explore this option ↗About this product information
Original choice guidance from the selected full description, bullets, specifications, current variant and scoped A+ text; no practical trial or visual approval by this author.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.



