The Beadsmith / Crimping & Stringing
The Beadsmith 0.6 mm and 1 mm Bead Reamers
A two-piece bead-and-pearl reamer set with 0.6 mm and 1 mm stainless-steel tips, wooden handles and storage-case wording in the title.

CHOOSING THIS MODEL
Two small measured tips for manual hole work
Two defined tip diameters are the reason to compare this set with a larger interchangeable reamer kit. The Beadsmith describes 0.6 mm and 1 mm stainless-steel tips for opening bead holes and softening rough edges, with wooden handles identified in the title. These dimensions describe the tools, not a promise that every bead can be enlarged to a certain size.
The stated method calls for carefully inserting a tip, moving the bead back and forth and stopping occasionally to inspect the opening and smoothness. It finishes by flushing the bead hole with water to remove dust. That last instruction concerns the worked hole; it is not an instruction to soak the wooden handles.
Choose the BR5 diamond set when you want its separate long hole-working and short rounded/triangular edge-working tips on one handle. Choose this pair for its explicitly sized fine steel tips. The source does not establish a diamond coating for BR106SET, and no grit grade is assigned from the neighboring reamer family.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Model | BR106SET |
| Contents | 2-piece reamer set |
| Tip diameters | 0.6 mm and 1 mm |
| Tip material | Stainless steel |
| Handles | Wood, as titled |
| Storage | Case named in title |
Check the selected size, working profile and supplied parts on Amazon before ordering.
Where this model is useful
- The two diameters make the fine-tip choice concrete.
- The source gives a stop-and-check method rather than a fixed enlargement claim.
Trade-offs to check
- A diamond coating or grit grade is not established for this pair.
- No universal safe enlargement size is promised for fragile beads.
What to check before choosing
Inspect as you work
The stated method pauses to check hole size and smoothness rather than forcing through to a target.
Care instructions
Clear the bead hole
Flush the worked bead hole with water to remove dust, as described.
Your questions about this product
Are these diamond tips?
The exact set states stainless steel; a diamond coating is not established.
How do I clear the worked hole?
The instructions say to flush the bead hole with water after working it.
Does 0.6 mm mean the finished hole will be exactly 0.6 mm?
It is a tip diameter. The result depends on the bead and how it is worked, so no exact finished-hole size is promised.
Other options to consider
About this product information
Exact selected-ASIN title, full available description, feature bullets, component-scoped specifications and all textual A+ sections reviewed; model-specific manufacturer sources used only where separately listed.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.



