SE / Bench Holding & Measuring
SE JT-SP402 Thirteen-Hole Bead Holder
A metal bead holder with thirteen openings and locknuts for holding small pieces during hole cleaning or reaming.

CHOOSING THIS MODEL
Hold the bead separately from the working tool
A bead holder separates the gripping task from the reamer or drill. The SE JT-SP402 uses a metal body and locknuts to clamp and release the bead, giving you something other than fingertips to hold while working on its opening. No drill or reamer is itemized with the holder.
The full description identifies thirteen holes ranging from approximately 1/32 to 1/4 inch. A shorter bullet instead describes that range as bead diameter, so check the actual seating geometry before ordering for a particular bead. It does not establish a universal outside-bead size or a drill-bit capacity.
The body is described at about 1⅜ inches in diameter by 1-3/16 inches high, while a separate dimensions entry differs. Treat those as approximate body information, not the working hole size. Choose a tweezer tool for picking and positioning a bead; choose this holder when the locknut-supported hole-work arrangement is the useful distinction.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Model | JT-SP402 |
| Holder openings | 13 |
| Body | Metal |
| Clamping | Locknuts |
| Described opening range | About 1/32–1/4 in; seating geometry to confirm |
| Supplied main tool | 1 bead holder |
Check the selected size, working profile and supplied parts on Amazon before ordering.
Where this model is useful
- Locknuts give a dedicated clamping and release arrangement.
- Thirteen openings offer alternatives for seating a small piece.
Trade-offs to check
- The short bullet and full description differ in whether the range describes holes or bead diameter.
- No drill, bit, reamer or universal bead-size capacity is established as included.
What to check before choosing
Check the seat, not only the number
Confirm the actual opening and bead seating before choosing it for a fixed bead size.
Your questions about this product
Is a drill included?
The listed component is the bead holder, not a drill.
What adjusts the grip?
Locknuts provide the described clamping and release.
Does 1/4 inch establish the largest bead I can hold?
The full description uses that range for the holder holes, while a bullet labels bead diameter; confirm the actual seating geometry.
Other options to consider
No other examined and currently admissible reference in this lot provides the same specific working function; compare the stated role and supplied parts rather than treating a neighboring tool as interchangeable.
About this product information
Exact selected-ASIN title, full available description, feature bullets, component-scoped specifications and all textual A+ sections reviewed; model-specific manufacturer sources used only where separately listed.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.



