The Beadsmith / Hammers & Metal Forming
The Beadsmith HAM21 Nylon Wedge Hammer
An 8 mm wedge and 32 mm flat round face provide two distinct contacts for metal forming.

CHOOSING THIS MODEL
An 8 mm wedge and 32 mm flat round face provide two distinct contacts for metal forming
HAM21 is the nylon choice when a wedge and a flat round surface are more useful than domes. The seller describes an 8 mm wedge face for tighter areas and a 32 mm round face with a flat working surface for flattening and forming. The 32mm face has a circular outline and a flat contact surface, while the narrower wedge is described for tighter areas.
The wooden handle is described as 9½ inches long, and the nylon head has a stated 115 mm size label and 3.8 oz head weight. A center screw secures the head. These are part measurements, not a material-thickness or force rating. The current variant is Wedge Hammer; the 75/90 mm double mallets and the 90 mm replacement-head pack are other selections. Compare HAM28 for two domed nylon faces, or OWDEN’s set when a bench block and different face materials are wanted together.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Working faces | 8 mm wedge; 32 mm flat-surfaced round face |
| Head material | Nylon |
| Handle length, as described | 9½ in, wood |
| Head-size label | 115 mm |
| Head mass, as described | 3.8 oz |
| Head fastening | Center screw |
| Selected variant / model | Wedge Hammer / HAM21 |
| Supplied quantity | One hammer |
Check the selected size, working profile and supplied parts on Amazon before ordering.
Where this model is useful
- Wedge and flat contact differ from a two-dome tool.
- The selected wedge variant is separate from spare-head listings.
Trade-offs to check
- Exact wire/sheet capacity and replacement-head compatibility are not established.
What to check before choosing
Match a replacement to HAM21
A replacement pack for the 90 mm mallet is not proof of fit to this wedge model.
Your questions about this product
Is the 32 mm round face domed?
It has a flat working surface; round describes its outline. HAM28 is the separate dome comparison.
What is the smaller face for?
The seller describes an 8 mm wedge face for tighter areas. The 115 mm head-size label is a separate measurement, not the width of that contact face.
Does this purchase include replacement heads?
The selected product is Wedge Hammer. The 90 mm replacement-head pack is another selection, and spare supply for this hammer is not established.
Other options to consider
About this product information
Original choice guidance from the selected full description, bullets, specifications, current variant and scoped A+ text; no practical trial or visual approval by this author.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.



